Responsibilities Of The Customer; Requests For Service And Spare Parts; 2- Technical Features; Components - Carlo De Giorgi MAP 1 Manual De Instrucciones

DENTAL LATHES

1.4 - RESPONSIBILITIES OF THE CUSTOMER

The user must install the appliance in a suitable place equipped with an
electrical system that complies with established legislation.
The appliance must be installed in a dry environment that is illuminated in
accordance with the requirements of established legislation.
NOTE: The expression "established legislation" refers to the laws in force in the user's
country.

1.5 - REQUESTS FOR SERVICE AND SPARE PARTS

For all electrical maintenance requirements, contact CARLO DE GIORGI
of Baranzate di Bollate, Via Tonale, 1.
In the case of faults, notify CARLO DE GIORGI technical personnel of the
exact nature of the problem, specifying also the lot number shown on the
label affixed to the rear of the appliance.

2- TECHNICAL FEATURES

2.1 - TECHNICAL FEATURES
Voltage
Frequency
Installed power
Tool speed
Mass
Noise level in no-load
condition

3 - COMPONENTS

The package supplied contains:
a) the appliance;
b) right-hand and left-hand spindles;
c) right-hand grinding wheel chuck;
d) user instructions.
Due to its intrinsic characteristics, the appliance can be moved by hand
Carlo de Giorgi
MAP 1 MAP 2
V 230/120 230/120 230/120 230/120
Hz 50/60 50/60
W 500
rpm 2,800 1,400
2,800
kg 10 10.5
dB 60
LUX 1 LUX 2
50/60 50/60
500 300
2,800 1,400
2,800
6
60 60
LUX FLEX
LUX OR
230/120
50/60
300 300
2,800
6.4 6
60 60
GB - 5