Standards And General Precautions; Introduction; Description Of The Appliance; Reference Standards - Carlo De Giorgi MAP 1 Manual De Instrucciones

1 - STANDARDS AND GENERAL PRECAUTIONS

1.1 - INTRODUCTION

This manual is the property of CARLO DE GIORGI S.r.l. The contents of
this manual cannot be reproduced or disclosed to other parties. All rights
reserved.

1.2 - DESCRIPTION OF THE APPLIANCE

The appliance in question is, depending on the installed tool, a buffing
machine, a polishing machine or a grinding machine designed,
respectively, for cleaning and buffing, for polishing and for removing
material or sharpening tools.

1.3 - REFERENCE STANDARDS

1.3.1 - Obligatory compliance

- EEC directive n. 98/37 – Machinery Directive - (D.P.R. n° 459/1996)
- EEC directive n.73/23 – Low voltage Directive (Italian legislation: Law n°
791/1977, Decree Law n° 626/1996, Decree Law n° 277/97)
- EEC directive n.89/336 relative to Electromagnetic Compatibility (EMC) -
(Italian legislation: Decree Law n° 615/1996)
- DPR 27.4.1955 n.547, "Norme per la prevenzione degli infortuni sul lavoro"
(work accident prevention regulations)
- DPR 27.4.1956 n.303, "Norme generali per l'igiene del lavoro" (general work
hygiene regulations)
- Italian Decree Law 12 August 1991 n.277 implementing EEC directives
n.80/605; n.83/477; 86/188; 88/642 concerning the protection of workers
against risks deriving from exposure to chemical, physical and biological
agents in the workplace, as defined by art. 7 of Law 30 July 1990, n.212

1.3.2 - Voluntary compliance

- EN 12100 Machine safety – Basic concepts; general design principles – Part 1
– Basic terminology and methods (ex EN 292-1) /Part 2 – Specifications and
technical principles (ex EN 292-2)
- EN 60204-1 Machine safety – Machine electrical equipment - Part 1: General
requisites
GB - 4
DENTAL LATHES
Carlo de Giorgi