Warnings; Maintenance; Cleaning And Lubrication - Carlo De Giorgi MAP 1 Manual De Instrucciones

DENTAL LATHES

5.2.3 - Warnings

In relation to the workpiece material, the user must adopt personal
protective equipment (facemask, gloves, etc.) and/or an efficient
exhauster system.
DO NOT LEAVE THE APPLIANCE UNATTENDED WHILE IT IS RUNNING
AND REMEMBER TO SWITCH IT OFF WHEN YOU FINISH WORKING WITH
IT AND FOLLOWING ALL STOPPAGES, IRRESPECTIVE OF THE MOTIVE.
IF YOU NOTICE MALFUNCTIONS STOP THE APPLIANCE IMMEDIATELY
AND DISCONNECT IT FROM THE ELECTRICAL POWER SUPPLY. BEFORE
RECONNECTING THE POWER SUPPLY FIND THE CAUSE OF THE
FAULT AND REMEDY IT. IN THE CASE OF PROBLEMS, CONSULT
CARLO DE GIORGI.
WHEN USING GRINDING WHEELS, ALWAYS POSITION THE WORKPIECE
REST SUPPLIED WITH THE APPLIANCE AT A DISTANCE NO GREATER
THAN 2 mm FROM THE EDGE OF THE GRINDING WHEEL AND WORK
WITH THE SAFETY SCREEN IN POSITION.

6 - MAINTENANCE

All work on electrical components accessible only after removing the
casing must be performed exclusively by properly authorized and trained
personnel. Certain parts of the unit constitute a source of danger during
maintenance work if performed when the appliance is powered up.

6.1 - Cleaning and lubrication

The appliance does not require any particular maintenance operations,
with the exception of regular cleaning of the working areas: before
cleaning the appliance always disconnect it from the power supply.
Carlo de Giorgi GB - 9