Operator; Intended Use; Safety Warnings - Carlo De Giorgi MAP 1 Manual De Instrucciones

DENTAL LATHES
Remove the spindles by unscrewing spindle extractor (5).

4.2 - OPERATOR

The operator starts the appliance by means of a voluntary command
thereby assuming direct control of its operation.
4.3 – INTENDED USE
The dental lathe is designed for use in dental laboratories, jewellers'
workshops and tool shops. The type of work performed depends on the
type of tool installed.
The appliance is not designed for any uses other than those specified by
the manufacturer.

4.4 - SAFETY WARNINGS

- The appliance must be used exclusively by skilled personnel who are
aware of the potential hazards;
- do not use the appliance in the vicinity of inflammable materials or
gases;
- do not open or disassemble the appliance when it is in operation;
- do not subject the appliance to excess workloads to prevent rapid
deterioration of the tools, degradation of performance levels or
overheating of the motor;
- ensure the right-hand and left-hand spindles are correctly fitted (the
left-hand spindle can be identified by the presence of a notch); if the
spindles are incorrectly installed the tool may disengage while the
appliance is operating;
Carlo de Giorgi
5
Fig. 2
GB - 7