Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4.
Tool Use and Care
(1) Use clamps or other practical way to
secure and support the workpiece to a
stable platform. Holding the work by
hand or against your body is unstable
and may lead to loss of control.
(2) Do not force tool. Use the correct tool
for your application. The correct tool will
do the job better and safer at the rate for
which it is designed.
(3) Do not use tool if switch does not turn it
on or off. Any tool that cannot be
controlled with the switch is dangerous
and must be repaired.
(4) Disconnect the plug form the power
source before making any adjustments,
changing accessories, or storing the tool.
Such preventive safety measures reduce
the risk of starting the tool accidentally.
(5) Store idle tools out of reach of children
and other untrained persons. Tools are
dangerous in the hands of untrained
users.
(6) Maintain tools with care. Keep cutting
tools sharp and clean. Properly
maintained tools, with sharp cutting
edges are less likely to bind and are
easier to control.
(7) Check for misalignment or binding of
moving parts, breakage of parts, and any
other condition that may affect the tool's
operation. If damaged, have the tool
serviced before using. Many accidents
are caused by poorly maintained tools.
(8) Use only accessories that are recommended
by the manufacturer for your model.
Accessories that may be suitable for one
tool, may become hazardous when used
with another tool.
5.
Service
(1) Tool service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified
personnel could result in a risk of injury.
(2) When servicing a tool, use only identical
replacement parts. Follow instructions
in the Maintenance section of this
manual. Use of unauthorized parts or
failure to follow Maintenance Instruction
may create a risk of electric shock or
injury.
SPECIFIC SAFETY RULES AND SYMBOLS
1.
Hold tools by insulated gripping
surfaces when performing an operation
where the cutting tool may contact
hidden wiring or its own cord. Contact
with a "live" wire will make exposed
metal parts of the tool "live" and shock
the operator.
2.
ALWAYS wear ear protectors when
using the tool for extended periods.
Prolonged exposure to high
intensity noise can cause hearing
loss.
3.
NEVER touch the tool bit with bare
hands after operation.
4.
NEVER wear gloves made from
materials likely to roll up such as cotton,
wool, cloth or string, etc.
5.
ALWAYS attach the side handle and
securely grip the Rotary Hammer.
6.
NEVER touch moving parts.
NEVER place your hands, fingers or
other body parts near the tool's moving
parts.
7.
NEVER operate without all guards in
place.
NEVER operate this tool without all
guards or safety features in place and
in proper working order. If maintenance
or servicing requires the removal of a
guard or safety feature, be sure to
replace the guard or safety feature
before resuming operation of the tool.
8.
Use right tool.
Don't force small tool or attachment to
do the job of a heavy-duty tool.
Don't use tool for purpose not intended
—for example— don't use circular saw
for cutting tree limbs or logs.
9.
NEVER use a power tool for applications
other than those specified.
NEVER use a power tool for applications
other than those specified in the
Instruction Manual.
10. Handle tool correctly.
Operate the tool according to the
instructions provided herein. Do not
drop or throw the tool. NEVER allow the
tool to be operated by children,
English
5
Tabla de contenido
