Combination Possibilities; Intended Use; Environmental Conditions; Service Life - Ottobock 3R106-Pro Instrucciones De Uso

1.2 Combination possibilities

INFORMATION
In a prosthesis, all prosthetic components have to meet the patient's requirements regarding the
amputation level, body weight, activity level, environmental conditions and field of application.
Prosthetic components that are especially well suited for combination with the product are listed
below.
Designation
Tube Clamp Adapter
Foam Cover

2 Intended use

2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Area of application
Our components perform optimally when paired with appropriate components based upon weight
and mobility grades identifiable by our MOBIS classification information and which have appro­
priate modular connectors.
3R106-Pro*
The product is recommended for mobility grade 2 (restricted outdoor walker) and
mobility grade 3 (unrestricted outdoor walker). Approved for a body weight of
m°
up to 125 kg (275 lbs).
kg
2R49
Approved for a body weight of up to 125 kg.

2.3 Environmental conditions

Allowable environmental conditions
Temperature range for use: -10 °C to +60°C
Allowable relative humidity 0 % to 90 %, non-condensing
Unallowable environmental conditions
Mechanical vibrations or impacts
Perspiration, urine, fresh water, salt water, acids
Dust, sand, highly hygroscopic particles (e.g. talcum)

2.4 Service life

This prosthetic component has been tested by the manufacturer for 3 million load cycles accord­
ing to ISO 10328. Depending on the patient's activity level, this corresponds to a service life of 3
to 5 years.
Reference number
4R156* (for hip disarticulation)
3S107 (for 3R106-Pro and 3R106-Pro=ST, if needed
also 3R106-Pro=KD)
3R27* (for hip disarticulation)
6R6 (for 3R106-Pro=KD)
21