Scope Of Delivery; Instructions For Use; Preparing The Product For Use; Information On Fabrication Of A Prosthesis - Ottobock 3R106-Pro Instrucciones De Uso

CAUTION
Mechanical damage to the product
Risk of injury due to change in or loss of functionality
► Use caution when working with the product.
► If the product is damaged, check it for proper function and readiness for use.
► In case of changes in or loss of functionality, do not continue using the product (see "Signs
of changes in or loss of functionality during use" in this section).
► Take any necessary measures (e.g. repair, replacement, inspection by the manufacturer's
customer service, etc.).
Signs of changes in or loss of functionality during use
Noticeable changes in functionality may include poor response, incomplete extension, diminished
swing phase control or stance phase stability, abnormal noises, etc.

4 Scope of delivery

The following single components and accessories are included in the scope of delivery in the spe­
cified quantities and are available for reordering as single components ( ), single components
with minimum order quantities ( ) or single-component packs ( ):
Fig. Item no.
–
1
1
1
–
1
–
The following parts are only for:
1
The following parts are only for:
1
The following parts are for reorder only (not included in the scope of delivery!)
1

5 Preparing the product for use

5.1 Information on fabrication of a prosthesis

CAUTION
Incorrect alignment, assembly or adjustment
Injuries due to incorrectly installed or adjusted as well as damaged prosthetic components
► Observe the alignment, assembly and adjustment instructions.
Quant­ Designation
ity
1 Prosthetic Knee Joint
1 Tube Adapter
0 Adjustment Wrench
1 Compression Spring, heavy duty
1 Compression Spring, light duty
1

Instructions for Use

Prosthetic Knee Joint
1 Pyramid Dome Protektor Kit
Prosthetic Knee Joint
1 Lamination Anchor
0 Single Component Pack
Consisting of:
1 Bumper
4 Truss Head Screw
4 Two-Hole Nuts
2 Set Screw
1 Set Screw
Reference number
–
2R49
710H10=2X3
513D83=1.4X12.6X66
513D83=1.1X12.9X66
647G208=all_INT
3R106-Pro
2Z11=KIT
3R106-Pro=KD
4G70
4D3
4Z81=4X12
501T1=M5X16
502R1=M5X16
506G3=M8X12-V
506G3=M8X10
23