Information Codes - Samsung SilverCare WF448AAW/XAA-05 Manual Del Usuario

trOL]be,shoot ng
INFORMATION CODES
Information codes may be displayed to help you better understand what is occurring with your Washer.
Unbalanced load prevented your Redistribute the load, press the Start/
Washer from spinning. Pause Button.
Door is unlocked when Washer is
running.
Door is open when Washer is running.
Your Washer failed to lock the door.
Water temperature control problem.
Heater Control problem)
The hot/cold water hose connection is
not correct.
Your Washer has tried to fill but has not
reached the proper water level.
Water level sensor problem
The door will not unlock.
Your washer is not draining.
It can also mean that the unit senses a
small clog while draining.
Press the Power button to turn off your
Washer, then restart the cycle. If the
code reappears, call for service.
Close the door tightly and restart the
cycle.
If the code reappears, call for service.
Close the door tightly and restart the
cycle.
If the code reappears, call for service.
Call for service.
Please connect the hot/cold water
hose connection correctly.
Call for service.
Call for service.
Make sure the door is firmly closed.
Push the Power button to turn off your
Washer, then turn it on again. If the
code reappears, call for service.
First of all, clean up the drain filter.
then check the following.
1) Turn off the unit and turn it on again.
2) Select only the Spin Cycle.
3) Press the Start/Pause to drain the
water.
Clean the debris filter.
If it still does not drain, call for service.
26 Troubleshooting