Making Corner, Surface And T-Shaped Joints (Fig. E); Making Mitred Joints (Fig. F) - Parkside PSVH 56 A1 Instrucciones De Uso

Making corner, surface and T-shaped joints (Fig. E)

♦ When making the joints shown, fix the wooden workpiece in place
with a clamp (not included in delivery).
NOTE
► Ensure that you clamp the wooden workpiece precisely and tightly.
♦ Select the appropriate woodscrews
table.
Wood thickness
♦ Screw in the selected woodscrews

Making mitred joints (Fig. F)

♦ Proceed as described for the previous joints (see Figs. A–C).
Measure the wood thickness and set the drilling depth.
♦ Place the drilling jig
♦ Drill holes as described in the section "Drilling holes (Fig. D)".
♦ Connect the wooden workpieces as described in the section "Making
corner, surface and T-shaped joints (Fig. E)".
PSVH 56 A1
≥ 12 mm
≥ 19 mm
≥ 27 mm
≥ 38 mm
as shown in the illustration.
with the help of the following
Woodscrew size
∅ 4 mm × 25 mm
∅ 4 mm × 30 mm
∅ 4 mm × 40 mm
∅ 4 mm × 60 mm
using the bit attachment
GB │ MT
.
│
27 ■