PNI PG2710 Manual De Usuario página 7

EN
Function Off:
*30*
When anti-crack function is On, all remote controls can not disarm the alarm system, only the "disarm" key
on the host can disarm the system.
When function is disabled, all remotes registered in the system can disarm the alarm system.
3.14 Arm Delay
* + [4] + [0~99] + *
0~99 means 0 to 99 seconds.
When arming system by remote control or by alarm keypad, the arming delay time can be set from 0 to 99
seconds before the system is on ARMING status. The system default is 00 seconds.
Ex: User wants to set arming delay for 30s : press *430* and the system will be on ARMING status 30s later
after press ARM key.
3.15 Telephone line self-checking On/Off
Function On:
*51*
Function Off:
*50*
When the telephone line is disconnected, the system will alarm interval to remind the user. User can turn
On/Off this function.
3.16 Remote calling ringing times
* + [6] + [0~9]*
When user calls the telephone line of the system, alarm system will automatically pick up after preset ringing
times. 0~9 means 0 to 9 ringing times for choosing. If it is set 0 time, then the host does not accept incoming
calls.
3.17 Restore Factory Setting
* + [8] + [password] + *
This command will restore system to factory settings (delete all preset telephone No.; delete alarm/arm
delay; turn Off telephone line self-checking function; siren alarming for 5 minutes). This command can not
delete remote control and detectors.
3.18 Same frequency interference remind On/Off
Function On:
*91*
Function Off:
*50*
When you turn on this function, and if there is same frequency interference signal emitting, the system will
alarm to inform you about this
When this function is off, and there is same frequency interference signal emiting, the system will do nothing.
3.19 Voice prompt On/Off
Stop voice prompt:
*041*
Start voice message prompt:
*040*
4. ACTIONS AFTER RECEIVING ALARM CALL
After system enters alarm mode alerts, it will automatically dial the alarm phone numbers one by one
and repeat 3 times from location 1-6 untill one of them is picked up. System is alarming at the same time
according to settings. User does not need to input password after receiving alarm call. Use must only press
the number keys on the phone to operate the corresponding functions:
[1] key: Listening [2] key: Siren sound
7