Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2.1 Main unit description
5
6
1
7
8
9
Index
AItem
1
Display screen
2
Keyboard
3
Speaker
4
Arm / Partial Arm (Intelligent) / Disarm /
Alarm buttons
5
Phone line 1
6
Phone line 2
7
Siren plug
8
12 V power supply
9
Backup battery On/Off switch
2.2. Remote control description
Press
key to arm system. In this arming mode the system fully protects premises . Trigger any sensor
will cause system alarm, and if it's connected to a land phone line, it will also triggers a emergency phone
call to the configured numbers.
Press
key to stay arm system. More precisely only perimeter door and window sensors. This mode
allows you to stay inside the protected area (in the house for example), and be protected by the alarm
system in the event of an outside intrusion attempt. Indoor sensors will not be active .
Press
to disarm system, stop siren if alarm, and changing status to Disarmed mode. After this operation
none of the normal set detectors will trigger an alarm.
4
Description
2 digit display. Displays the main system status.
For configuration and commands
Voice message and sounds
The buttons allows activation of main functions
described on the unit keypad.
This connector is generally used to connect a
landline telephone .
This connector is generally used to connect a
phone to same landline.
Connect included siren to this plug .
Connect included power supply to this
connector.
This switch allows On/Off connection of backup
battery inside.
3
EN
2
3
Tabla de contenido
