Assembly And Adjustments - DeWalt D26411 Manual De Instrucciones

A. On/off switch
B. Air vents
C. Kick-off stand
D. Air temperature adjustment knob
FIG.1
E
G
A
F

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of injury, turn unit off and
disconnect tool from power source before installing and removing
accessories, before making any adjustments or removing/installing
attachments or accessories.
Setting the Air Temperature (Fig. 1)
The air temperature can be adjusted to suit a wide range
of applications. Turn the air temperature adjustment knob (D)
clockwise or counterclockwise for higher or lower heat. The table
below suggests settings for different applications.
E. Nozzle
F. Tool hanging ring
G. Heat barrel cover
B
D
C
6
Setting Applications
Low • Drying paint and varnish
• Removing stickers
• Waxing and dewaxing
• Drying wet timber prior to filling
• Shrinking PVC wrapping and insulation tubes
• Thawing frozen pipes
Medium • Welding plastics
• Bending plastic pipes and sheets
• Loosening rusted or tightly fastened
nuts and bolts
High • Removing paint and lacquer
• Soldering plumbing joints
ATTACH THE CORRECT ACCESSORY
This tool is supplied with a set of accessories for different
applications.
Icon Description
φ
20 Cone nozzle
50 mm Fish tail
surface nozzle
1. Make sure the on/off switch (A) is in position "O" and the tool
is disconnected from the power source. Ensure the nozzle has
cooled down.
2. Place the desired accessory onto the nozzle.
Purpose
Welding, shrink sleeving
(heat concentrated over
small area)
Drying, thawing
(heat spread
over wide area)