Using The Cooler; Cleaning And Care - Dometic GROUP WAECO CoolMatic CS-MP2 Instrucciones De Montaje

_CS-ACT-MP2.book Seite 22 Freitag, 15. Oktober 2010 10:55 10

Cleaning and care

7.3

Using the cooler

Caution - danger of overheating
Ensure at all times that there is sufficient ventilation so that the heat
that generated during operation can dissipate. Ensure that the
ventilation slots are not covered. Make sure that the device is
sufficiently far away from walls and other objects so that the air can
circulate.
Caution – danger from excessively low temperature
Ensure that the only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
➤ Switch on the cooler on by turning the temperature control knob to the
right.
✓ The cooler starts cooling the interior.
➤ Set the cooling temperature using the temperature control knob.
Turn right = colder, turn left = warmer.
Note
If you do not want to use the cooler for a longer period of time:
Leave the cooler slightly open. This prevents smells from building
up.
8 Cleaning and care
Caution - danger of damaging the device
Never clean the device under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the device.
➤ Occasionally clean the inside of the device with a damp cloth.
22
CoolMatic CS-MP2