Reversing The Door Swing; Tools You Will Need - GE 20 Serie Manual Del Propietario Y Instalación

Installation Instructions
REVERSING THE DOOR SWING
IMPORTANT NOTES
When reversing the door swing:
NOTE: Door swing is not reversible on
stainless
steel models.
• Read the instructions all the way through
before starting.
• Handle parts carefully to avoid scratching
paint.
• Set screws down by their related parts to
avoid using them in the wrong places.
• Provide a non-scratching work surface for
the doors.
IMPORTANT: Once you begin, do not move
the cabinet until door-swing reversal is
completed.
These instructions are for changing the
hinges from the right side to the left side--if
you ever want to change the hinges back to
the right side, follow these same instructions
and reverse all references to left and right.
Unplug the refrigerator from its electrical
outlet,
Empty all door shelves, including the dairy
compartment.
TOOLS YOU WILL NEED
Adjustable Wrench
3/8" and 10 mm Socket
Drivers
Masking Tape
Putty Knife or
Thin-blade Screwdriver
Phillips Screwdriver
[] REMOVE THE
REFRIGERATOR DOOR
[] Tape the door shut with masking tape.
[]
[]
[]
Remove the hinge cover on top of the
refrigerator door by squeezing it and
pulling it up.
Using a 3/8" or 10 mm socket driver,
remove the bolts securing the top hinge to
the cabinet. Then lift the hinge straight up
to free the hinge pin from the socket in the
top of the door.
__ Hing_e COver
e
Remove the tape and tilt the door away
from the cabinet. Lift the door off the
center hinge pin.
[] Set the door on a non-scratching surface
with the inside up.
24