Breaking In The Pump - Husky H1504ST Guía De Uso Y Cuidado

Assembly (continued)
4

Breaking in the pump

□
Check and tighten all bolts, fittings, etc.
□
Turn the pressure regulator knob (G) fully clockwise to
open the air flow.
□
Place the ON/OFF switch (B) in the OFF position and plug
in the power cord.
□
Open the drain valves (K) completely.
□
Place the ON/OFF switch (B) in the ON position and run the
air compressor for 10 minutes to break in pump parts.
□
Place the ON/OFF switch (B) in the OFF position.
□
Close the drain valves (K).
G
B
K
K
11
Contact 1-888-43-HUSKY for further assistance.
HUSKYTOOLS.COM