Symbols - Husky H1504ST Guía De Uso Y Cuidado

Symbols

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols
will allow you to operate the tool better and safer.
Symbol
V
A
Hz
~
Name
Volts
Amperes
Hertz
Alternating Current
Class II Construction
Wet Conditions Alert
Read The Operator's
Manual
Eye Protection
Safety Alert
Risk of Bursting
Risk of Fire or Explosion
Risk of Electrical Shock
Hot Surface
Risk to Hearing
Risk to Breathing
Drain Tank
Designation/Explanation
Voltage
Current
Frequency (cycles per second)
Type of current
Double-insulated construction
Do not expose to rain or use in damp locations.
To reduce the risk of injury, the user must read and understand the
operator's manual before using this product.
Always wear safety goggles, safety glasses with side shields, or a full face
shield when operating this product.
Precautions that involve your safety.
Do not adjust the regulator to result in output pressure greater than the
marked maximum pressure of the attachment. Do not use at a pressure
greater than 155 PSI.
Do not spray flammable liquid in a confined area. The spray area must be
well ventilated. Do not smoke while spraying or spray where a spark or
flame is present. Keep the compressor as far from the spraying area as
possible, at least 15 feet from the spraying area and all explosive vapors.
Hazardous Voltage: Disconnect from the power source before servicing. The
compressor must be grounded.
To reduce the risk of injury or damage, avoid contact with any hot surface.
Always wear ear protection when using this tool. Failure to do so may result
in hearing loss.
Air obtained directly from the air compressor should never be used to supply
air for human consumption.
Drain the tank every day to prevent corrosion and possible injury due to tank
damage. Risk of bursting. Tilt tank to drain.
20