Operation - Profi Cook PC-UMS 1085 Instrucciones De Servicio

Electric Connection
• Before inserting the power plug into the outlet,
check that the mains voltage to be used match-
es that of the device. You can find the required
information on the nameplate.
• Connect the device only to a correctly installed
safety socket.
Short-interval use
The appliance is suitable for short-interval use of a
maximum of 2 minutes. Let the appliance cool for
1 minute before using it again!
Pulse mode
Switch to pulse mode by turning the control to the
"P" position and then release it. Use this operation
mode for example to chop larger pieces.

Operation

NOTE: Safety switch
Operation of the appliance is prevented in case of
wrong installation.
• You can mount either the mixing vessel or the
smoothie container on the base unit.
• Always check for correct seating of the sealing
ring in the knife block. The smooth surface of
the sealing ring must face down.
• Ensure that the function switch is in the "0" posi-
tion.
Preparation of the Mixing Vessel
1. Tighten the knife block by hand to the bottom of
the mixing vessel.
2. Place the mixing vessel onto the motor housing.
Follow the symbols on the housing. Position the
mixing vessel so that the handle lies above the
symbol.
3. Secure the mixing vessel by turning it clockwise.
4. Now put the ingredients that are to be mixed
into the mixing vessel.
5. Put the lid on. Press it down firmly.
48
6. Close the refill opening with the cap. Tighten the
lid by turning it clockwise.
Preparation of the Smoothie Container
1. Fill your ingredients into the smoothie container.
2. Screw the knife block by hand onto the opening
of the smoothie container.
3. Turn the smoothie container upside down and
set it onto the base unit.
4. Tighten the smoothie container by turning it
clockwise.
Mixing
Operation is carried out with the setting control:
Level 0 = off
Level 1 = low rpm
Level 2 = high rpm
P = High speed in pulse mode

NOTE:
Mixing vessel and smoothie container can be
operated in all speed steps.
Adding further ingredients to be mixed (when
using the mixing vessel)
Items to be mixed or spices can be fed in through
the filling aperture.
• Please switch off the machine before doing so.
• Before you switch the device on again, close the
opening.
Stopping Operation
1. Turn the switch to the position "0".
2. Wait until the knife has stopped.
3. Disconnect the mains plug from the wall socket.
4. Remove the container together with the knife
block. A short counterclockwise turn is suf-
ficient.
5. a) Take off the lid to pour the contents.
b) Turn the smoothie container upside down
and replace the knife block by the lid (8).