Operation; Cleaning - Profi Cook PC-UM 1127 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25

Operation

Preparation
1. Place the mixing vessel in position.
2. Now put the ingredients that are to be mixed into the
mixing vessel.
3. Put the lid on.
4. Close the refill opening with the cap.
Operation
1. Press ON / OFF to turn the appliance on.
2. You have 2 options to start the operation:
• Manual input: By selecting SPEED / SPEED and
TIME / TIME you can set the desired speed setting
and running time.
NOTE:
The buttons TIME / TIME can be pressed only
after previously selecting a speed setting.
• Auto functions: Select one of the auto functions by
pressing the appropriate button.
3. Press the START / STOP button to start the program.
Adding Further Ingredients to be Mixed
Items to be mixed or spices can be fed in through the filling
aperture.
• Stop the program by pressing START / STOP.
• Add further ingredients through the refill aperture.
WARNING:
• Always remove the plug before cleaning.
• Under no circumstances immerse the appliance in water for
cleaning purposes. Otherwise this might result in an electric shock
or fire.
• The blades on the knife block are very sharp. A risk of injury exists!
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• The individual parts are not dishwasher-safe.
NOTE: Preliminary Cleaning
Fill the mixing vessel halfway with water. Press the CLEAN
button.
For thorough cleaning, please remove the mixing vessel.
42
PC-UM1127_IM
• Close the opening before restarting the program.
• Press the START / STOP button. The program will contin-
ue in the previously adjusted setting.
NOTE:
Stop a program only by pressing START / STOP. By press-
ing ON / OFF all preset configurations will be lost.
Stopping Operation
NOTE:
If you let a program keep running until the end you will hear
5 signal tones.
1. Press the ON / OFF button to abort the program.
2. Wait until the blade comes to a complete stop.
3. Remove the mains plug from the socket.
4. Remove the mixing vessel. Remove it by pulling it
upward.
5. Take off the lid before pouring.
IMPORTANT NOTE:
Citrus juices and food containing acids should never be
stored in metal vessels.
Recipes
You can find recipes in our supplied recipe booklet.
You also can find additional recipes and suggestions on the
Internet.

Cleaning

Mixing Vessel, Lid, Cap, Tamper and Silicone Overlay
Clean these parts in a bowl of hot water. Then dry everything
before assembling the parts again.
NOTE:
Do not operate the appliance without silicone overlay!
Housing
Only a moderately moist cloth should be used for cleaning
the outside of the appliance.
27.07.17
Tabla de contenido
loading

Este manual también es adecuado para:

501127

Tabla de contenido