Button Functions; Operation; Cleaning - Profi Cook PC-MS 1009 Instrucciones De Servicio

Use attachment "B" for frothing
milk. Place it on top of attach-
ment "A". Observe the tabs for the
noses. To remove the attachment,
lift it up.

Button Functions

Warm stirring or frothing:
The milk is heated to approx. 65°C. This
is the ideal temperature for coffee taste.
The appliance needs approx. 2 minutes
to cool down again. You can shorten this
period by rinsing the jug with cold water.
Cold stirring or frothing:
You can select this function at any time.

Operation

Foaming milk
CAUTION:
Observe the capacity marking MAX
wise the milk will foam over.

NOTE:
• For optimum results use milk with 3.5% fat
content and fill in 175 ml.
• Milk with 1.5% fat content and soy milk or
lactose-free milk does not froth as well.
1. Attach attachment "B".
2. Fill between 60 ml and 120 ml cold milk into the
jug.
3. Attach the lid to the appliance.
4. Place the jug on the base.
5. Press one of the two buttons.

NOTE:
• The indicator lamp lights up.
• The button illumination shows the function.
• This process takes approx. 60 to 100 seconds
and ends automatically. The indicator lamp
flashes for approx. 20 seconds to indicate the
end of the process.
32

NOTE:
• Press the button again or remove the jug from
the base to terminate the process earlier.
Warm Up Milk, Hot Chocolate or Sauces
CAUTION:
Observe the capacity marking MAX
1. Remove attachment "B".
2. Fill between 60 ml and 250 ml cold milk into the
jug.
3. Continue as described under point 3 "Foaming
milk".
WARNING:
• Always pull the power supply plug before

cleaning.

• Allow the appliance to cool down.
• Never immerse the base and the can in water
for cleaning. It could result in an electric
, other-
shock or fire.
CAUTION:
• Do not use a wire brush or other abrasive
items.
• Never use sharp or scouring cleaning materi-
als.
Base and can from outside
Clean the outside of the base and can with a dry
cloth, without additives.
Jug Inside
Wipe the inside of the jug with a damp cloth. Dry
with a soft cloth.
Frother (Attachment "B")

NOTE:
To remove the attachment, lift it up.
• Clean the attachment immediately after use.
.
Cleaning