Service And Maintenance; Nozzle Adjustments; Winterizing - Speck Badu Stream II Manual De Instalación

4

Service and Maintenance

Nozzle Adjustment
To help set the nozzles in position for best performance, please follow these instructions:
1. Parts required:
Quantity 2 - 4' x 1.5" PVC Pipe
Quantity 2 - 1.5" MPT x 1.5"/1.25" Hose Adapter
Quantity 2 - Female Adapter 1.5" Slip x 1.5" FPT
2. Turn off the jet pump(s).
3. Insert each jet adjustment tool into jet nozzle.
4. Bring the ends of the adjustment tools together so they are touching in between the jet housings. Then raise the tools
together so the ends touch the water surface. (See Figure 16)
5. Remove jet adjustment tool.
Figure 16
BaduStream Nozzle Adjustment

Winterizing

In areas subject to freezing water temperatures, you should protect your equipment. We recommend you purchase
a winter cover kit part #2308752006K. This kit includes one (1) winter plate, one (1) gasket and four (4) screws.
Also, you can protect your swimjet system as follows: Drain pool until water level has dropped below the anti-
entrapment cover. Then protect pump by removing drain plug and red filler plug (or lid).
18
Top View
10"
Hose Adapter 1.5"
PVC Coupling 1.5"
Water Level
Perspective View
PVC Pipe 1.5" x 4'
~10"
Side View