Chap. 4 Use Of Machine; Description Of The Commands - Hobart H66 Manual De Uso Y Mantenimiento

Pag. 8
6
7
(The message appears when the water in the tank reaches a maximum safety
level beyond which overflow could occur. The machine therefore blocks all
functions and activates the drain motor pump).
If the problem persists, contact a service centre.
8
The message appears when there is a problem with the drain motor pump
Turn the machine off and on. If the problem persists, contact a service centre.
Note: The machine allows wash and rinse cycles to be performed as
long as the maximum safety level is not reached, and in that case the
1
2
USE AND MAINTENANCE MANUAL
BOILER
(Boiler resistor failure)
(Heating overtime)
MAXIMUM SAFETY LEVEL
Turn the machine off and on.
.
DRAIN FAULT.
and/or with the drain ducts.
SAFL message is displayed.
.

Chap. 4 USE OF MACHINE

4.1

DESCRIPTION OF THE COMMANDS

To turn the machine on, press the button 1.
indicated
(the corresponding warning light will light
up)
.
2. The machine is ready to use when the
light comes on.
GB
at left/right