Chap. 5 Maintenance; General Rules - Hobart H66 Manual De Uso Y Mantenimiento

GB
USE AND MAINTENANCE MANUAL
•
Drain the water from the tank by lifting the overflow-pipe. For the
model with drain pump please follow the operations described in the
«Use instructions» paragraph.
•
Disconnect the main switch of the equipment.
•
Close the «rolling shutter valve» for the hydraulic connection.
•
Remove the filters clean them under a water jet with a nylon brush.
•
Pay attention not to let any dirtiness rests on the bottom of the
drain pump filter inside the tank. Clean the tank with a moderate water
jet. Wash outside surfaces when are cold with non-abrasive products
which are especially studied for steel maintenance.
REMARK: Do not wash the equipment with direct jet or at
another pressure because eventual infiltrations to the electric
components may harm the regular working of the equipment or
of the single safety systems, and penalty for this would be the
loss of guarantee.
5.1

GENERAL RULES

The machine are designed to reduce maintenance requirements. It is
necessary to observe the following rules to make the machine last
long, and work without problems.
In any case, it is necessary to observe the following rules to make the
machine stay in perfect working order:
•
keep the machine clean and in good condition
•
avoid making temporary or urgent repairs frequently
It is very important to observe the maintenance directions; check all
the different parts of the machine periodically, so that no anomaly can
occur, thus anticipating the time and equipment needed for any
maintenance work.
Before cleaning turn off the power.

CHAP. 5 MAINTENANCE

Pag. 11