2 Intended use
2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Area of application
Our components perform optimally when paired with appropriate compon
ents based upon weight and mobility grades identifiable by our MOBIS clas
sification information and which have appropriate modular connectors.
The product is recommended for mobility grade 2 (restricted
outdoor walker) and mobility grade 3 (unrestricted outdoor walk
m°
kg
er).
•
The maximum approved body weight is specified in the technical data
(see Page 19).
2.3 Environmental conditions
Allowable environmental conditions
Temperature range for use: -10 °C to +60 °C
Relative humidity: no restrictions
Chemicals/moisture: fresh water, salt water, chlorine water, soapsuds, sweat, urine
Solids: dust, sand, highly hygroscopic particles (e. g. talcum)
Clean the product after contact with humidity/chemicals/solids, in order to
avoid increased wear and damage(see Page 18).
2.4 Service life
Prosthetic foot
This product has been tested by the manufacturer with 2 million load cycles
according to ISO 22675. Depending on the patient's activity level, this cor
responds to a service life of 2 to 3 years.
Footshell, protective sock
The product is a wear part, which means it is subject to normal wear and
tear.
3 Safety
3.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
13