Recommendations For Using The Battery; Installation And Start-Up; Contrast Adjustment - Promax 25 Manual De Instrucciones

3.1.2 Recommendations for using the battery

In case of anticipating a long period of inactivity for the equipment it is
recommended to store it with the battery discharged.
When the equipment starts the operation after a long period of inactivity to
follow next steps:
•
Charge the device with the external power feeder until the charge indicator light on
the front panel is lit.
•
Start-up the equipment, making sure that the AUTO POWER OFF function is OFF,
and to maintain this situation for 10 or 14 hours.
Use the equipment in normal way, reason why after one to three whole cycles
of charge/discharge, depending on the time and temperature of inactivity, the battery
will have been reconditioned.
3.2

Installation and start-up.

The PROMAX-25 has been designed for use as portable equipment.
A fully charged battery can power the equipment for more than two hours.
When the low battery indicator appears on the display ( ), the battery must be
recharged.
When a fully discharged battery is installed, it is possible that, due to residual
charges, the PROMAX-25 may start up. In this case, the instrument will automatically
disconnect before the low battery indicator appears on the display.

3.2.1 Contrast adjustment

The contrast of the graphic LCD screen of the PROMAX-25 can be adjusted
with the rotary control [5] on the side panel of the device (see figure 2). Adjust the
contrast of the display by turning the control to achieve the best display in any setting.
The new contrast value is maintained when the device is turned off.
Page 10
USER'S MANUAL. PROMAX-25
09/2004