General Safety Instructions - Festool LEX 2 125/3 Manual De Instrucciones

Compressed air eccentric sander
Technical data
Sanding pad diameter
- LEX 2 125
- LEX 2 150
- LEX 2 185
Drive Compressed-air vane motor
Operating pressure (fl ow pressure)
Speed
- LEX 2 125/3, LEX 2 125/7, LEX 2 150/3,
LEX 2 150/7, LEX 2 185/7
- LEX 2 150/11
Working strokes
- LEX 2 125/3, LEX 2 125/7, LEX 2 150/3,
LEX 2 150/7, LEX 2 185/7
- LEX 2 150/11
Sanding stroke
- LEX 2 125/3, LEX 2 150/3
- LEX 2 125/7, LEX 2 150/7, LEX 2 185/7
- LEX 2 150/11
Air consumption at nominal load
Weight
- LEX 2 125, LEX 2 150
- LEX 2 185
The specifi ed illustrations can be found at the
beginning of the operating instructions.
Symbols
Caution. Danger!
Read the operating instructions/notes
Wear ear protection!
1 Use for intended purpose
As specified, the machines are designed for
sanding wood, plastic, metal, stone, composite,
paintwork, fi ller and similar materials.
Material containing asbestos must not be proc-
essed with these tools.
The user is liable for damage and injury
resulting from incorrect usage!
2 Safety instructions
2.1

General safety instructions

Warning! Before setting up, using, repair-
ing and servicing this air tool or replacing
accessory parts, you must have read and
understood all safety instructions and informa-
tion. Ignoring warning notes and instructions may
result in serious injuries.
Keep all of the attached documents and pass
on the documentation if the machine changes
ownership.
125 mm
150 mm
185 mm
6 bar
6500 - 8000 rpm
6000 - 7000 rpm
13000 - 16000 rpm
12000 - 14000 rpm
3 mm
7 mm
11 mm
390 l/min
1.3 kg
1.4 kg
12
a. Keep your place of work tidy.
working areas increases the risk of an accident.
b. Please take your surroundings into consid-
eration. Do not leave pneumatic tools out in
the rain. Keep work area well lit.
Never use pneumatic tools in the vicinity of
fl ammable liquids or gases.
c. Keep away from children.
ers to touch the pneumatic tool or the com-
pressed-air hose.
Keep others away from your work area.
d. Store your pneumatic tools safely.
pneumatic tools should be stored in a dry, in-
accessible or locked location, out of the reach
of children.
e. Use the correct pneumatic tool.
the pneumatic tool for purposes for which it
was not intended.
f. Wear suitable work clothes.
loose fi tting clothing or jewellery. They can
get entangled in moving parts.
Rubber gloves and non-slip footwear are rec-
ommended for outdoor work. Long hair should
be protected with a hair net.
g. Wear safety goggles.
face mask for work which produces dust.
h. Connect a dust extractor.
available dust extraction equipment is con-
nected and used correctly.
Observe the regional safety regulations for
hazardous dusts and vapours.
Operate and service the air tool as described
in the recommendations included in these
instructions and use accessories and attach-
ments from Festool to minimise the release of
dust and vapours into the atmosphere.
In dusty environments, make sure that the dis-
sipation of exhaust air does not disturb the dust.
i. Do not use the compressed-air hose for pur-
poses for which it was not intended. Never
carry the pneumatic tool by the compressed-
air hose.
Protect the compressed-air hose from heat,
oil and sharp edges.
Never direct the air fl ow towards yourself or
other persons.
j. Secure the workpiece.
or a vice to hold the workpiece fi rmly.
These clamp the workpiece more securely
than with hands and also allow both hands to
be free to operate the pneumatic tool.
k. Avoid abnormal postures.
stance and keep your balance at all times.
Untidiness in
Do not allow oth-
Unused
Do not use
Do not wear
You should also wear a
Make sure that
Use clamping devices
Maintain a safe