Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch POF 1200 AE Manual Original

OBJ_BUCH-323-007.book Page 16 Monday, June 6, 2016 10:00 AM
16 | English
13 Depth stop
14 Scale for depth-of-cut
15 Left handle (insulated gripping surface)
16 Clamping lever for locking of routing depth
17 Scale for depth-of-cut fine adjustment (POF 1400 ACE)
18 Adjustment knob for depth-of-cut fine adjustment
(POF 1400 ACE)
19 Mark for zeroing
20 Release lever for guide bushing
21 Router bit*
22 On/Off switch
23 Thumbwheel for speed preselection
24 Adjusting screws for step buffer (POF 1200 AE)
25 Tightening nut with collet
26 Open-end spanner, size 19 mm*
27 Extraction hose (Ø 35 mm)*
28 Extraction adapter*
29 Knurled screw for extraction adapter (2x)*
30 Guide rod for parallel guide (2x)*

Technical Data

Plunge router
Article number
Rated power input
No-load speed
Speed preselection
Constant electronic control
Connection for dust extraction
Tool holder
Plunge depth
Weight according to EPTA-Procedure 01:2014
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-17.
Typically the A-weighted noise levels of the product are:
Sound pressure level 95 dB(A); Sound power level
106 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2 2
a =6 m/s , K=2 m/s .
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
1 609 92A 201 | (6.6.16)
31 Parallel guide*
32 Centring pin*
33 Wing bolt for centring pin*
34 Curve guide*
35 Router compass/guide-rail adapter*
36 Router compass handle*
37 Wing bolt for coarse adjustment of
router compass (2x)*
38 Wing bolt for fine adjustment of
router compass (1x)*
39 Fine-adjustment knob for router compass*
40 Centring screw*
41 Guide rail*
42 Base spacer
(included in the "router compass" set)*
43 Guide bushing*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
POF 1200 AE
3 603 B6A 0.1
W 1200
-1
min 11000–28000
mm 6/8
inch
mm
kg 3.4
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2009/125/EC (Regulation
1194/2012), 2011/65/EU, 2014/30/EU, 2006/42/EC in-
cluding their amendments and complies with the following
standards: EN 60745-1, EN 60745-2-17, EN 50581.
POF 1400 ACE
3 603 B6C 7.1
1400
11000–28000
 

–
 
6/8
¼ ¼
55 55
3.5
/II /II
Bosch Power Tools