Product Features; Technical Data; Noise/Vibration Information - Bosch GRG 18V-16 C Professional Manual Original

®
With the built-in Bluetooth Low Energy Module, power tool
data and settings are transferred between the power tool
and a mobile device by means of Bluetooth
logy.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Nosepiece
(2) Cover sleeve
(3) Hanging ring
(4) Nosepiece magazine
(5) Mandrel container (for broken-off rivet mandrels)
(6) Handle (insulated gripping surface)
(7) Belt clip
a)
(8) Rechargeable battery
(9) Wrench
a)
(10) Battery release button
(11) User interface
(12) On/off switch
(13) LED worklight
(14) Indicator: Jaw cleaning reminder (user interface)
(15) Indicator: Jaw checking reminder (user interface)
(16) Power tool status indicator (user interface)
(17) Working modes indicator (user interface)
(18) AUTO button to select the working mode (user inter-
face)
(19) RESET button to reset the reminder (user interface)
b)
(20) Blind rivet
(21) Jaw sleeve
(22) Spanner flat
(23) Jaws
(24) Pressure spring
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
b) Commercially available (not included in the scope of deliv-
ery)

Technical Data

Cordless rivet gun
Article number
Stroke
Pulling force
Weight according to EPTA-
A)
Procedure 01:2014
Permitted ambient temperat-
ure
– during charging
Bosch Power Tools
Cordless rivet gun
– during operation and dur-
®
wireless techno-
Recommended rechargeable
batteries
Recommended chargers
Data transfer
Bluetooth®
Max. signal range
Frequency range used
Output power
Energy supply Bluetooth® Low Energy module
Coin cell
Coin cell service life, approx.
A) Measured at 20−25 °C with battery GBA 18V 1.5Ah and GBA
B) The mobile terminal devices must be compatible with Bluetooth
C) The signal range may vary greatly depending on external condi-

Noise/Vibration Information

Noise emission values determined according
to EN 62841-1.
Typically, the A-weighted sound pressure level of the power
tool is 73.5 dB(A). Uncertainty K = 3 dB. The noise level
when working can exceed the volume stated. Wear hearing
protection!
Vibration total values a
determined according to EN 62841-1:
a = 1.0 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
GRG 18V-16 C
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
3 601 JK5 ...
plication tools or is poorly maintained, the vibration level
mm 25
and noise emission value may differ. This may significantly
N 16,000
increase the vibration and noise emissions over the total
working period.
kg 2.0 to 3.0
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
°C 0 to +35
over the total working period.
ing storage
MHz
Years
18V 12Ah.
Low Energy devices (version 4.2) and support the Generic Ac-
cess Profile (GAP).
tions, including the receiving device used. The Bluetooth® range
may be significantly weaker inside closed rooms and through
metallic barriers (e.g. walls, shelving units, cases, etc.).
(triax vector sum) and uncertainty K
h
2 2
, K = 1.5 m/s .
1 609 92A 6HC | (14.12.2021)
English | 17
GRG 18V-16 C
°C –20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
Bluetooth® 4.2
B)
(Low Energy)
C)
m 30
2400–2483.5
mW < 1
3 V lithium battery,
CR 2450
5
®