User Interface - Hitecsa 105 Manual De Instrucciones De Uso, Mantención E Instalación

Outdoor air temperature (°C)
•

6. "USER INTERFACE"

Display in main screen
Clock or Water Outlet Temperature.
The writing Off, if control is disabled (closed Remote On/Off).
Been active warning (alarm)
Heating operation (set)
Cooling operation (set)
Heat pump OFF
Defrosting
State of attenuation of environmental comfort
N° 1
Pump 1 (HP)
N° 2
Dehumidifier running
N° 3
Domestic hot water production (DHW)
N° 4
Electric heater running as DHW integration
N° 5
Auxiliary generator running
N° 6
Frost protection function 1
N° 7
Water operation at set point 2 (for fan coil)
Clock setting
105
110
116
Permanent start-up
10a
Indoor air temperature (°C)
Temperature gradient on the water from 5K to 10K.
Maximum temperature of the inlet water heating 55°C.
Maximum temperature of the produced water in heating 60°C.
Maximum temperature of the produced water in cooling 23°C.
The keypad display shows the machine allows the integrated manage-
ment of the heat pump and the heat system. Below are its main functions
and the access methods to the individual parameters enabling customisa-
tion of operation with different engineering types and/or use of the system.
The keypad is positioned in the heat pump, under the side cover for ac-
cess to the electrical connections of the same
Intermittent start-up
Heating operation forced by control (DHW)
Active maximum frequency limit (Night mode)
Pump 2 (System)
Electric heater running as antilegionnaires integration
Frost protection function 2
105-116
110
-
-
-
-
-
-
-
-
-
-