Motor Base - Vitamix 750 Serie Manual Del Usuario

4. Perform one of the following procedures:
• Variable Speed:
a. Rotate the Variable Speed dial to 1.
b. Press the Start / Stop switch.
c. Slowly increase Variable Speed to 10.
d. Run the blender for 30 to 60 seconds.
e. Rotate the Variable Speed dial to the Stop Symbol ( ) at the top of the dial.
• Program:
a. Rotate the Variable Speed dial to the Cleaning ( ) program icon.
The Cleaning ( ) program will run for approximately 1 minute.
b. After the program stops, rotate the Variable Speed dial to the
Stop Symbol ( ) at the top of the dial.
5. Allow mixture to stand in the container for an additional 1 ½ minutes.
6. Pour bleach mixture out. Allow container to air dry.
7. Do not rinse after sanitizing.
Lid, Lid Plug and Tamper
Separate the lid and lid plug. Wash parts in warm, soapy water. Rinse clean under
running water and dry. Reassemble before use.
IMPORTANT:
To ensure continued and effective performance, do not put the
container, lid, lid plug or tamper in the dishwasher.

Motor Base

1. Unplug the power cord.
2. Wash the outside surface with a damp, soft cloth or sponge that has been rinsed
in a mild solution of liquid detergent and warm water. Do not place the motor
base in water.
3. The centering pad can be removed for more thorough cleaning.
4. Thoroughly clean the switches so they work freely. They may become sticky from
use. Moisten a cotton swab with a household degreaser or cleaner and clean the
grooves around the switches. Immediately dry all surfaces.
5. Polish with a soft cloth.
42
CARE AND CLEANING
WARNING
Electrical Shock Hazard.
Disconnect power before
cleaning blender.
Failure to follow instructions can
cause death or electrical shock.