Hoover SSNH1000 Manual De Instrucciones página 4

GETTING TO KNOW YOUR CLEANER
A. Power light (Metallic Red) / Steam Ready Indicator Light (Green)
B. Cleaner main body
C. Handle
D. Steam Release Trigger
E. Water Tank Lid
F. Clamp Ring
G. Nozzle Connector
H. Release Button
I. Textile Pad (x1)
J. Measuring Jug
K. Conic Tool
L. Scraper Tool
M. Comb Brush
N. Angled Nozzle
O. Metal Brush
P. Round Brush
Q. Window squeegee / Upholstery Tool (with Textile Pad)
R. Hose
S. Safety Lock
ASSEMBLING YOUR CLEANER
WITHOUT HOSE
1. Attach the conic tool [K] to the cleaner aligning the moulded Graphic marks (-). Rotate
the conic tool clockwise until it is locked securely in position (=). [1]
2. Once the conic is attached it can be used for direct steam applications or you can
attach the required accessory. [2]
WITH HOSE
1. Fit the Hose over the nozzle on the product. Align the orientation marks (-) and rotate
clockwise until hose is in locked position (=) and secure. [3]
2. To remove hose, slide release button at the base of Hose away from cleaner and
rotate counter-clockwise and gently pull away from cleaner. [4]
3. To attach the conic tool to the Hose, insert the tool into the the hose and rotate
clockwise until the Conic tool is locked securely. [5]
USING YOUR CLEANER
BEFORE YOU BEGIN CLEANING
1. Remove the clean water cap by pushing down and turning anti-clockwise. [6]
2. Fill the measuring jug no more than the Max fill line.
3. Fill the unit with water. [7]
4. Replace the cap by pushing down and turning clockwise.
5. Unlock the safety lock and push steam release trigger, ensure it is locked when not
in use. [8]
IMPORTANT: Always unplug the cleaner and press the steam release trigger to
release any remaining steam pressure before adding water.
IMPORTANT: Always unplug the cleaner and press the steam release trigger to release
any remaining steam pressure before adding water.
Once the boiler has cooled down you can then remove the clean water tank cap by
pressing down and rotating the cap in an anticlockwise direction. PLEASE ENSURE
NO STEAM IS EMITTED WITH THIS ACTION !!! IF SO STOP AS THE BOILER IS NOT
FULLY COOLED.
ACCESSORIES
1. Push the desired small tool onto the conic tool aligning the arrows. [2]
2. Twist clockwise to secure in place. [2]
3. Plug the steam cleaner into the main power. The red ON light will illuminate. [8]
4. After a few minutes the green Steam Ready light will illuminate indicating the cleaner
is ready for use. [8]
5. To produce steam press the Steam Trigger.
Note: All small tools can only be attached to conic tool.
Conic Tool Use on heavily soiled areas such as showers, kitchens. [9]
Window Squeegee Use on windows and mirrors for a smear free clean. [10]
Upholstery Tool Use the textile pad over the window tool for use on sofas and
chair fabrics. [11]
Round Brush Use on stubborn grease and grime. [12]
Metal Brush For oven grills and racks. [13]
Angled nozzle For hard to reach areas such as taps etc. [14]
Comb brush Ideal for cleaning all grout lines, sanded or nosanded. [15]
IMPORTANT: Always unplug the cleaner when adding water, changing accessory
tool.
2
GB