Before First Use; Using The Appliance; Using The Blender - Philips HR2002 Manual Del Usario

EnglisH
8
caution
- Never use the mill for more than 30 seconds without interruption. Let the mill cool down for at
least 1 minute between processing cycles.
- Never forget to place the sealing ring in the blade unit before you assemble the mill jar,
otherwise leakage occurs.
- Always process cloves, star anise and aniseed together. If processed separately, these ingredients
may attack the plastic materials of the appliance.
- The mill beaker may become discoloured when you use the mill to process ingredients such as
cloves, anise and cinnamon.
- The mill is not suitable for chopping raw meat. Use the blender instead.
- Do not use the mill to process liquids such as fruit juice.
Filter (HR2004 only)
caution
Never use the filter to process ingredients hotter than 80°C.
-
Never overload the filter. Do not put more than 70g dried soy beans or 150g fruit in the filter
-
at the same time.
- Always make sure the lid is closed/assembled properly and the measuring cup is inserted
properly in the lid before you switch on the appliance.
Cut fruit into smaller pieces before you put it in the filter.
-
Soak dried ingredients, such as soy beans, before you put them in the filter.
-

Before first use

Thoroughly clean the parts that come into contact with food before you use the appliance for the
first time (see chapter 'Cleaning').

Using the appliance

Blender
The blender is intended for fine pureeing, chopping and blending. With the blender you can prepare
soups, sauces and milk shakes. You can also use it to process vegetables, fruit, meat, pancake batter
etc.
Preparing the blender for use
1 Assemble the sealing ring on the blender blade unit (Fig. 2).
Screw the blade unit onto the bottom of the blender jar until the blade unit it is fixed
2
properly. (Fig. 3)
Put the blender jar with the blade unit attached on the motor unit and fix it by turning it
3
clockwise ('click'). (Fig. 4)
The blender jar can be mounted in two positions: with the handle on the right side or on the left
side.
4 Put the mains plug in the wall socket.

Using the blender

1 Put the ingredients in the blender jar.
2 Close the lid.
HR2011/HR2010: Place the lid on the blender jar, push it down and turn the lid clockwise ('click').
3 Insert the measuring cup into the opening in the lid. (Fig. 5)
4 Turn the control knob to speed 1 or 2.