Satcr Function - Promax TV EXPLORER HD Manual De Usuario

Figure 54.- DiSEqC commands: DRIVE
Press the DiSEqC key
execution mode and to locate the mark cursor on the frequency or channel.

5.22 SATCR function

By means of function SATCR it is possible to control the devices of a TV
installation satellite that are compatible with the SatCR
Router), which allows to concentrate manifold down frequencys (slots) by an only cable.
By this way each user using a slot can tune and decode any signal present in the
satellite.
In order to select the SATRC function, press the DiSEqC key
panel, and using the rotary selector [1] activate the SATRC option. In the display are the
configuration options that users can modify: slot selection, number of slots, device
address, Frequency sep, pilot signal activation, and finally the frequencies corresponding
to each slot.
8
SatCR is a trademark of STMicroelectronics.
Page 78
USER'S MANUAL. TV EXPLORER HD
[21] on frontal panel in order to quit the commands
Figure 55.- SatCR command screen.
8
technology (Satellite Channel
[21] from frontal
11/2009