Spectrum Exploration Function (Explorer) - Promax TV EXPLORER HD Manual De Usuario

In order to select the different fields on the screen, press the cursors
and then edit by pressing the rotary selector [1].
After selecting the START field the instrument begins to carry out the available
measurements automatically. Once completed, the process will be ready to repeat again
(for example, for a new test point), or view measured data by turning the rotary selector
[1], or store the information in memory (SAVE) or exit from this acquisition (EXIT).

5.11 Spectrum exploration function (EXPLORER)

The Exploration function allows exploring the full frequency band in order to
identify the analogue channels and digital presents, in agreement with the configuration
set, over the active channel plan. In order to activate the function hold pressed the
[25] key until the EXPLORER screen appears.
Figure 13.- Spectrum exploration screen. EXPLORER.
When the instrument completes the exploration, a new channel plan is generated
based on the active channel plan. This new channel plan contains only the channels that
have been identified and the rest are removed. The equipment offers the possibility of
saving in memory the channel plan generated to use later. If the new channel plan is not
saved it will remain active until the instrument is powered off or some other plan is
loaded.
:
NOTE In the case that is desired to explore or identify DVB-C signals will be
necessary to select previously DVB-C standard as digital signal identifier
by means of
Page 38
USER'S MANUAL. TV EXPLORER HD
[22] PREFERENCES menu.
[6] key
11/2009