Connector For Cam Modules And Smart-Card - Promax TV EXPLORER HD Manual De Usuario

Also known as PERITEL connector (in conformity with standard NF-C92250). The
signals in this connector are the following:
PIN number SIGNAL
1 Right channel audio output
2 Right channel audio input
3 Left channel audio output
4 Audio grounding
5 Blue grounding (B)
6 Left channel audio input
7 Blue output (B)
8 Switching voltage
9 Green grounding (G)
10 Digital bus interface
11 Green output (G)
12 Digital bus interface
13 Red grounding (R)
14 Digital bus reserved
15 Red output (R)
16 Blanked signal
17 Composite video grounding
18 Blanked return
19 Composite video output
20 Video input
21 Connector shield grounding
NOTE: In order to select the SCART connector operation mode between: video Input,
video Output or Automatic, from the TV visualisation mode [10] in terrestrial
band, follow the following steps:
1) Select the Measurement Configuration menu by pressing the
key and verify that the type of signal selected is ANALOGUE.
2) Select the suitable operation mode for the SCART by means of the
Video/Aud Ext option in this menu.

6.6 Connector for CAM modules and SMART-CARD.

Enables the conditional access (disencryption) of encoded digital TV signals, in
agreement with the DVB-CI (Common Interface) recommendation.
This technology supports all those disencryption systems for which a valid CAM
module exists, according to DVB-CI, with the corresponding subscriber card.
Page 82
USER'S MANUAL. TV EXPLORER HD
Table 6.- Description of the Scart.
CHARACTERISTICS
(not connected)
(not connected)
(not connected)
(not connected)
(not connected)
[17]
11/2009