Satcr Function - Promax TV EXPLORER HD ATSC Manual De Instrucciones

When selecting the COMMANDS option in the Spectrum Analyser mode
[13] in the screen will appear a dynamic execution line in order to use with the
positioner commands: DRIVE EAST / WEST. This allows to carry out a fine adjustment
in steps or in seconds to aim the antenna through the rotary selector
Press the DiSEqC key
execution mode and to locate the mark cursor on the frequency or channel.
5.24

SATCR function

By means of function SATCR it is possible to control the devices of a TV
installation satellite that are compatible with the SatCR
Router), which allows to concentrate manifold down frequencys (slots) by an only cable.
By this way each user using a slot can tune and decode any signal present in the
satellite.
In order to select the SATRC function, press the DiSEqC key
frontal panel, and using the rotary selector
display are the configuration options that users can modify: slot selection, number of
slots, device address, Frequency sep, pilot signal activation, and finally the frequencies
corresponding to each slot.
10
SatCR is a trademark of STMicroelectronics.
Page 88
Figure 65.- DiSEqC commands: DRIVE
[21] on frontal panel in order to quit the commands
USER'S MANUAL. TV EXPLORER
10
technology (Satellite Channel
[1] activate the SATRC option. In the
HD ATSC
[1].
[21] from
12/2010