Promax TV EXPLORER HD Manual De Usuario página 124

It activates the Preferences menu (long pulsation):
Language
Beep
Skin
Light Sensor
Ter. Identify
Min. Ter. Power
Min. Ter. Level
Identification DVB-S2
Min. Sat. Power
C/N
Identify Timeout
Sat Band
Auto Power Off
Time Power Off
Terrestrial Units
Page 26
USER'S MANUAL. TV EXPLORER HD
Selects the language between DEUTSCH, ENGLISH,
ESPAÑOL, FRANÇAIS,
PORTUGUÊS.
Activates (ON) / deactivates (OFF) the beeper.
Sets the display skin. It is possible to add new types
through the USB port.
It activates a light sensor to automatically adjust the
display contrast and brightness. Options are: High
contrast (with high luminosity), Low contrast (with low
luminosity) and AUTO.
Selects the type of terrestrial digital signal, DVB-C or
DVB-T/H used by AUTO-ID and EXPLORER functions.
Sets the minimum power for a terrestrial digital signal to
be identified.
Sets the minimum level for a terrestrial analogue signal
to be identified.
It allows to identify the DVB-S2 satellite digital signals.
Sets the minimum power for a satellite digital signal to
be identified.
Defines the C/N measuring method between Auto or
Reference Noise (Manual), used to determine the
frequency where noise level will be measured in the
spectrum analyser mode.
Sets the maximum time that the equipment will carry out
the identification of a channel unknown before going to
the next one.
(Only satellite band).
Selects the C-band or Ku-band for tuning satellite
signals.
Activates the automatic power off mode.
Select the power off timeout from 1 to 120 minutes.
Select the measurements units for terrestrial and cable:
ITALIANO, CATALÀ and
11/2009