Promax TV EXPLORER HD ATSC Manual De Instrucciones página 61

USER'S MANUAL. TV EXPLORER
On selecting the Carrier / Noise measurement mode the screen displays the
following information:
Figure 28.- Carrier-to-noise ratio measurement (C/N).
As well as the video carrier / noise level ratio (C/N) (41.0 dB in previous figure), the
frequency or channel (depending on the tuning mode selected) and the level of the video
carrier and video/audio ratio are also shown. When representing the spectrum by means
of pressing [13] key, the NOISE cursor is automatically positioned to a side of the
carrier tuned. That is, the cursor will indicate the point where the value of the noise is
lower, whenever the C/N (AUTO) option is selected from the PREFERENCES
menu. If the C/N (MANUAL) option has been activated the frequency where noise level
will be measured will correspond to the position of the vertical discontinuous green-
coloured cursor that appears in the spectrum graph
In order to modify this frequency, press the measurement configuration
[17] key, to accede to the CONFIGURATION menu. By turning the rotary selector
[1], locate the NOISE cursor on the position of the marker using
option (see section "5.16.1 Markers") or directly enter the value of the new
MARKER
noise frequency by means of
12/2010
HD ATSC
option.
NOISE FREQ
[13].
NOISE FREQ. TO
[22]
Page 53