Promax TV EXPLORER HD ATSC Manual De Instrucciones página 102

The user just needs to insert the subscriber Smart-Card in the CAM module
connector designed for this purpose. When a CAM module has been inserted and the
instrument is in the digital TV operation mode, accede to the Measurement
configuration menu by pressing the
INTERFACE option. By means of this option the user can navigate through the CAM
module menu. Whenever an option is selected, the waiting
module allows accessing to the next menu or to the option selected.
In order to insert or to change one CAM module, follow these steps:
- The CAM module connector [41] is located on the equipment rear panel. Place
the instrument on a stable surface and insert the module so the printed arrow
appears on visible upper face, pressing until the extractor mechanism button
[38] becomes activated.
Figure 71.- Subscriber Smart-Card and CAM module insertion.
- To extract an inserted CAM module, press the button from extractor
mechanism [38] and remove the module.
The insertion of a CAM module or a SMART-CARD in a wrong position might produce
the instrument malfunction and could generate damages to the equipment.
Page 94
USER'S MANUAL. TV EXPLORER
[17] key and select the COMMON
icon appears until the
IMPORTANT REMARK
HD ATSC
12/2010