EnGenius EP802 Manual De Usuario página 28

b. Press 2 to set Any Key TALK:
Use CHANGE left soft key to select and confirm "On" or "Off".
Default is "Off".
Re: When set "on", press any key (except
answer the incoming call.
c. Press 3 to set LCD Contrast:
(1)
Use or to scroll through option 1~8. Default is 6.
(2) Press SAVE left soft key to confirm selection.
d. Press 4 to set LCD Backlight:
(1)
Use or to scroll through option 1~3 (1.8 seconds 2.On
3.Off ). Default is "8 seconds".
(2) Press SAVE left soft key to confirm selection.
e. Press 5 to set Name Tag:
(1) Use CHANGE left soft key to select and confirm "On" or "Off".
Default is "Off".
(2) Press SAVE left soft key to confirm selection.
Re: When Set "On", the handset match the caller ID with the phone
book entries; once matched, the LCD screen will display the name
or nickname instead of pure caller ID info (needs Call Waiting
with Caller ID service from local telephone company)
f. Press 6 to set Language:
(1)
Use or to scroll through option (English, Spanish,
French, Italian, German, Dutch, Polish, Czech, Hungary,
Romanian, Turkish).
Default is "English".
(2) Press SAVE (Left) soft key to confirm selection.
g. Press 7 to set Custom Name:
(1) Enter characters using the Character Table and method
discussed in the Phonebook section.
(2) Use
or to move the cursor backward or forward to
insert (to the left of the cursor) or delete (the character above the
cursor, or left of the cursor if cursor is on the right of the last
character).
~55~
and SILENT key) to
(3) Press SAVE (Left) soft key to confirm setting.
Re: Once entering the custom name, the greeting of LCD in standby
mode will be changed as the entering.
Defalut greeting is "EP802".
h. Press 8 to Change Password:
(1) Enter original password (4 digits) of handset then press
soft key when enter this menu.
(2) Enter new password (4 digits) then press
confirm new password.
i. Press 9 to set Headset Ring: See Headset Ring operation on Page
51.
7. Press 6 to set Base Settings:
When enter this menu, you must enter Base PIN code first (4 digits).
Re: The PIN code is for Base Settings. Default is "0000".
a. Press 1 to set DTMF Duration.
Enter the DTMF duration (90~200ms), press
(1)
confirm the setting. Default is 100ms.
Re: Please check with your dealer before you change it. If the duration
not matches with PSTN or PBX setting, it may operate faultily.
b. Press 2 select flash key timing. Default is 600ms.
(1)
Use or to scroll through option 1~9 (100~900ms). Or
press digit key (1~9) directly.
Press SELECT left soft key to confirm selection.
(2)
Re: The default value (600 ms) works in most areas. Changing this
setting may cause Flash key not working. Change only when you
are certain of the new value would work.
c. Press 3 to set Assign Next HS
Enter 2-digit handset ID followed by pressing
(1)
When register a new handset, the base will assign the specific
(2)
handset ID which assigned in advance to the new handset.
d. Press 4 to set Clear HS
Enter 2-digit handset ID followed by pressing
(1)
The base will erase the handset ID from system.
(2)
e. Press 5 to Change PIN:
Enter the new Base PIN followed by
(1)
Re: Default Base PIN is "0000".
Press 6 to set Auto Hang Up:
f.
OK
SAVE left soft key to
OK left soft key to
OK left soft key.
OK left soft key.
OK left soft key.
~56~
left