Charger Illustration; Charger Features - EnGenius EP802 Manual De Usuario

Charger Illustration

DC in
Handset charging slot
~23~

Charger Features

1. DC In
Connects to Charger AC Adaptor.
2. Handset Charging Slot
a. Charge handset battery when handset is placed in cradle.
b. Refer to the handset LCD for charging status
(1) Charging: battery status bar is running and the LCD screen showed:
"Charging".
(2) Fully Charged: battery status bar stands still and the LCD screen would
display "Charge Complete"
(3) Charge Fail: Should there be any error occurred during charging mode,
the LCD screen would display "Charge Fail"
3. It is impossible to overcharge the battery using this charger.
4. The adaptor for charging station can be used as travel charger as well.
However, you can't turn off the power while you charge the handset via
travel charger. A warning message" "Unplug Travel Charger then OFF"
will be shown on the LCD.
Notes:
1. Fully charge battery packs before first use.
2. Handset will be "power on" automatically when placing on the
charging slot.
3. However, if you run drain the battery, it will take around one
minute for handset to auto power on.
~24~