EnGenius EP802 Manual De Usuario página 27

1. Press MENU right soft key to enter menu mode while the phone is in
standby mode.
Re: You can either press
confirm the selected menu. Or Press the digit directly to confirm the
selected menu. For example, press
and 1 to select the Ring Volume.
2. Press 1 to select KeyGuard (see Key Guard operation on page 34 ).
3. Press 2 to add, delete, edit, view and edit the phonebook (see
Phonebook instruction on page 39 ).
4. Press 3 to set Sounds settings:
a. Press 1 to select Ring Volume:
Two options for ring volume: Line (for incoming call) and Intercom (for
intercom call). Set each option respectively.
When setting each option, use
"Off", "Low", "Medium", "High", "Vibrate" and "Vibrate & High". Press
SELECT left soft key to save selection. Default = Medium.
b. Press 2 to select Ring Tone:
Two options for ring tone: Line (ring tone for incoming call) and
Intercom (ringer for intercom call). Set each option respectively.
Use the or to scroll through 8 ringers, press
soft key to save selection. Default = 1.
c. Press 3 to select Key Volume when a key is pressed:
Use or to scroll through 4 options: Off, Low, Medium, and
High. Press SELECT left soft key to save selection. Default =
Medium.
d. Press 4 to select Key Tone:
Use the or to scroll through 4 options: 1, 2, 3 and 4. Press
SELECT left soft key to save selection. Default = 1.
or , followed by SELECT left soft key to
MENU right soft key followed by
or to scroll through 6 options:
SELECT
~53~
5. Press 4
a. Press
(1)
4 (2)
(3)
(4)
(5)
(6)
b. Press
37 .
c. Press
d. Press
e. Press
51.
f. Press
49.
left
g. Press
The area code setting allow calls within local and regional area codes
to be dialed without prefix.
(1)
(2)
6. Press 5
a. Press
to set Call Settings:
1 to set Dial Prefix:
Press or to turn on or off the dial prefix feature.
Default = Off.
If "On" is selected, the handset is prompted to enter the prefix
number, up to 14 digits can be entered.
Use Delete right soft key to edit prefix number.
Press SAVE left soft key to confirm the selection.
When this feature is turned on, the LCD will prompt the user
"Dial Prefix? Yes or No" on each outgoing phone call from call
logs, phonebook, and dial-and-send dialing, the current prefix is
also displayed.
Re: the prefix number will be added automatically in front of the
dialed number if press YES left soft key.
This feature is useful for access code, calling card, and credit
card calls, etc.
2 to Group Select: see Handset Group Subscription on page
3 to set Call Barring: see Call Barring operation on Page 42.
4 to set Feature Call: see Feature Call operation on Page 45.
5 to set Baby Monitor: see Baby Monitor operation on Page
6 to set Call Manager: see Call Manager operation on Page
7 to set Area Code:
Set Local Area Code :
Press MENU-4-7-1 to set the LAC. Enter the local area code (3-
digit) then press SAVE left soft key to confirm selection.
Set Country Area Code :
Press MENU-4-7-2 to set the country code. Enter the code (3-
digit) then press SAVE left soft key to confirm selection.
to set Phone Settings:
1 to set Mic Gain: See Mic Gain operation on Page 50.
~54~