Mounting The Handlebar - Stihl RMA 410 C Manual De Instrucciones

English
Mulching Result
Prerequisites for a good mulching result:
Optimum cutting height (between
–
setting 3 and 5)
Lawn should be dry
–
Use properly sharpened blades
–
Low mowing speed
–
Vary mowing direction and overlap
–
the cuts
Mow very high grass in gradual
–
stages
The housing can become clogged and
block the blade if the cutting height is too
low or the grass is wet.
Replacing the Blade
Blade replacement and maintenance –
see "Sharpening the Cutting Blade."
14

Mounting the Handlebar

Mounting the Handlebar Assembly
2
3
1
Push the bushing (1) into the hole in
N
the lower handlebar (3).
Push the left and right cup washers
N
(2) (convex sides facing handlebar)
onto the bushing in the lower
handlebar (3).
4
20 - 25 Nm
2
Fit the handlebar (1) in the forked
N
opening (2).
Insert the screw (4) through the
N
holes in the fork, washer and
bushing in the handlebar.
Fit the locknut (3) in the recess in
N
the fork head.
Tighten down the screw (4) to 20 -
N
25 Nm.
Fit the cable (1) in the guides on the
N
2
fork head.
Secure the cable (1) to the
N
handlebar with the cable clip (2).
Folding the Handlebar
3
The handlebar can be folded down to
clean, transport or store your cordless
lawn mower.
2
1
1
RMA 410 C