Connecting A Computer - Satlink FB250 Manual De Usuario

CONNECTING A COMPUTER

To connect a computer to the FB250 BDU you need a LAN (Cat.5)
cable.
1. Plug one end of the LAN cable to any of the four RJ-45 ports
meant for DATA and the other end to your computer network
card.
2. Use the Web Console as listed in the Data Menu section of Chap-
ter 4 - Using the Web Console, to configure the FB250 BDU and
activate a data connection.
3. Configure your computer to fetch automatically IP and DNS
CONFIGURING RJ-11 VOICE/FAX PORTS
PHONE port can be used either for standard voice call or for fax. Fax
calls use 3.1 kHz high quality voice (64kbps, A-Law PCM) and standard
telephony uses standard quality voice call (4kbps, AMBE+2). FB-250 is
default configured as shown below.
When there is an incoming standard voice call, all the phones con-
nected to those ports configured as standard voice call for 'Incoming
call' will ring. Once one of them answers the call, all other phones will
stop ringing.
Similarly, for an incoming fax/high quality voice call, all ports con-
figured for 'Incoming call' as "3.1 kHz high quality voice/fax call" will
ring, regardless of whether the connected device is a fax machine or a
standard analog phone.
FAX port is exclusively for connecting to FAX machine.
222 [email protected]
N