Satlink FB250 Manual De Usuario página 201

Set the same rate for both the Desired and Minimum rates.
3. Check the Error Correction checkbox if it is required.
Enabling error correction should only be enabled
Destination Port Ranges
Default destination port ranges and protocol type for each profile
are listed.
To add a new destination port range:
1. Enter the port range in the space provided and choose TCP or
UDP as the protocol type; or click Add from Templates to select
the port ranges from other profiles.
To determine the port number for the type of service you wish to use,
you may search them from the Internet. An example of port numbers:
for Real Audio and Video streaming, you may use
Port 554, 7070 and 7071 for protocol type TCP or Port 6770 to 7070
I
Click Update Settings when all updates on the profile settings
are done.
I
Click Activate Profile to activate the selected profile.
Port Forwarding
Port Forwarding is a feature for Router (multiple-user) mode. This
feature sets the FB250 UE to direct incoming traffic on certain TCP/UDP
port to a specific port on a local PC (IP Address).
200 [email protected]
N
under high interference environments.
for protocol type UDP.