Satlink FB250 Manual De Usuario página 203

5. Enter the Destination Port number in the space provided (For ex-
ample: listening port of the particular service (for example TCP
port 80 for web server) on the PC that is connected to the FB250
UE).
6. Click Apply to allow the settings to take effect.
Settings
You can select the Ethernet mode to be used for data connection.
Follow these steps to select the Ethernet mode:
1. Select the desired mode to be used during the data connection:
I
Router (Single User) is with NAT/PAT disabled
I
Router (Multi-User) is with NAT/PAT enabled for multi-user.
If Router (Single User) mode is selected, it is recommended
to use data port -1 (first RJ45 port from the left)
2. Check the Auto Reconnect checkbox if it is required to get the
standard IP primary connection to be reconnected automatically
in the event the connection is disconnected without user inter-
vention.
3. Click Update to allow the selection to take effect.
I
Click Refresh to query the current mode.
202 [email protected]
N
to be connected to the PC/Laptop.