Rejecting A Call - Silvercrest KH 2376 Instrucciones De Uso

Handling and operation
Call accept/end
With an incoming call you hear the call signal via your mobile telephone, whilst in
the device's display is shown the call number.
You accept an incoming call by pressing the TALK button on the microphone
unit or the
You end the call by pressing the TALK button again on the microphone unit
or the

Rejecting a call

With an incoming call press, for longer than 2 seconds, the TALK button on
the microphone unit or press the
remote control to reject the call.
To call
Press the
display.
With the number buttons enter the telephone number that you want to call.
Press the
Redial
Hold down the TALK button on the microphone unit or the
device and/or on the remote control for approx. 2 seconds.
–
–
Turn the multi controller or press the VOL- and/or VOL+ buttons on the
remote control to show the last 10 dialed numbers one after the other.
Press the
Select the entry REDIAL and then press the
control to end redial.
Bluetooth Car Radio KH 2376
button on the device and/or on the remote control.
button on the device and/or on the remote control.
button on the remote control. A blinking cursor appears in the
button again. The number will be dialed.
- If no call number was previously selected via the remote control's
number buttons REDIAL appears briefl y in the display and then the last
number dialed from the mobile telephone will be dialed.
If one or more call numbers were already dialed via the remote control's
number buttons REDIAL appears in the display.
button on the remote control to select the chosen call number.
button on the device and/or on the
button on the remote
GB
button on the
71