Overview Of The Components / Scope Of Delivery; Unpacking The Appliance; Electrical Connection; The Kneading Machine - Clatronic KM 3648 Instrucciones De Servicio

Any other use is considered improper and may result in
material damage or even personal injury.
The manufacturer is not liable for damages caused by
improper use.
Overview of the Components /
Scope of Delivery
Page 3:
1 Mixing bowl
2 Safety cover for mixing engine
3 Swivel arm
4 Release button for lowering / raising the arm
5 Knob 6 Motor housing
7 Mixing bowl
8 Splash guard
9 Cover for meat grinder engine
10 Meat grinder with filling tray and darner
11 Whisk
12 Stirring hook
13 Dough hook
14 Protection shield
Page 4: Assembly of the Mixing Bowl
1 Glass carafe
1a Cap of the lid (measuring cup)
1b Lid
1c Security ring
1d Sealing ring
1e Knife block
1f Screw­on top
Page 5: Assembly of the Meat Grinder
15 Spiral housing
16 Spiral
17 Knife
18 3 sieves (fine, medium, coarse)
19 Locking ring
20 Adapter for sausage attachment
21 Sausage attachment
22 2­part attachment "Kebbe"
23 Adapter for cookie attachment
24 Biscuits attachment
25 Biscuits cutter form
26 4 pasta attachments (different pasta shapes)

Unpacking the Appliance

1. Remove the appliance from the package.
2. Remove all packaging material such as films, filler, cable
holders and cardboard.
3. Check the delivery contents for completeness.
4. Should the package contents be incomplete or damages
be found, do not take the appliance into operation. Take it
immediately back to the dealer.
54
KM3648_all [email protected]_new
NOTE:
Dust or production residues can be located on the
appliance. We recommend you to clean the machine as
described under "Cleaning".

Electrical Connection

Check whether the power supply that you want to use
coincides with that of the appliance. The information can be
found on the nameplate.

The Kneading Machine

Installation and Operation of the Kneading Machine

CAUTION:
Never press the release button (4), if you have placed the
mixing bowl! The mixing bowl tilts.
NOTE:
A safety switch prevents operation without cover for the
mixing engine.
Unless you have previously used the mixer or meat grinder,
cover the drive shaft of the mixing engine and the spiral
housing with the respective safety cover.
1. Open the swivel arm: Press the release button (4).
Move the arm by hand to the highest position.
2. If you need the splash guard, fix it now from the bottom of
the swivel arm. Position the splash guard (8) so that the
filling opening is in front of you. Press the splash guard on
to the swivel arm.
3. If you want to use the dough hook (13) or the stirring
hook (12), mount previously the protection shield (14).
It prevents the drive shaft from coming into contact with
the dough.
Hold the protection shield the way you hold a bowl. Insert
the dough hook or the stirring hook from below through
the recess of the protection shield and turn it firmly by a
quarter turn.
4. Use of a tool:
At the upper end of the tool you
see an opening for the drive
shaft and the cotter pin. Slide
the tool over the drive shaft.
Press and rotate the tool simul­
taneously clockwise so that the
cotter pin of the drive shaft locks
into the tool.
5. Mixing bowl: Put the bowl into its holder. Turn the bowl
toward LOCK until it stops.
6. Fill your ingredients into the mixing bowl.
NOTE:
If you knead heavy doughs, do not put all the ingredi­
ents at once into the mixing bowl. Start the kneading
with flour, sugar and eggs. Add fluids slowly during the
kneading.
01.06.16