General Power Tool Safety Warnings - Makita BJS160 Manual De Instrucciones

Cizalla inalámbrica para metal
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
ENGLISH (Original instructions)
1.
Button
2.
Red part
3.
Battery cartridge
4.
Switch lever
5.
Indicating lamp
6.
Hex wrench
SPECIFICATIONS
Max. cutting capacities
Min. cutting radius
Strokes per minute (min
Overall length
Net weight
Rated voltage
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
...... Read instruction manual.
Cd
............. Only for EU countries
Ni-MH
Li-ion
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for cutting sheet steel and stainless
sheet steel.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
4
Explanation of general view
7.
Screw
8.
Center blade
9.
Thickness gauge
10. Side blade
11. Hex socket head bolt
12. Oil supply
Model
Steel up to 400 N/mm
Steel up to 600 N/mm
Aluminum up to 200 N/mm
-1
)
END004-4
ENE037-1
GEA010-1
BJS160
2
1.6 mm (16 ga.)
2
1.2 mm (18 ga.)
2
2.5 mm (13 ga.)
250 mm
4,300
362 mm
1.9 kg
D.C. 14.4V
Save all warnings and
instructions for future reference.
CORDLESS SHEAR SAFETY
WARNINGS
1. Hold the tool firmly.
2. Secure the workpiece firmly.
3. Keep hands away from moving parts.
4. Edges and chips of the workpiece are sharp. Wear
gloves. It is also recommended that you put on
thickly bottomed shoes to prevent injury.
5. Do not put the tool on the chips of the workpiece.
Otherwise it can cause damage and trouble on the
tool.
6. Do not leave the tool running. Operate the tool
only when hand-held.
7. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
8. Do not touch the blade or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
9. Avoid cutting electrical wires. It can cause serious
accident by electric shock.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
manual may cause serious personal injury.
13. Pin
14. Limit mark
15. Brush holder cover
16. Notch
17. Screwdriver
18. Brush holder cap
BJS161
BJS100
1.0 mm (20 ga.)
0.7 mm (23 ga.)
2.5 mm (12 ga.)
2.0 kg
1.9 kg
D.C. 18V
D.C. 14.4V
BJS101
30 mm
4,300
364 mm
2.0 kg
D.C. 18V
GEB067-1
Tabla de contenido
loading

Este manual también es adecuado para:

Bjs161Bjs100Bjs101Bjs101rfeBjs101zjBjs161rfe ... Mostrar todo

Tabla de contenido