Adjusting And Using The Top Tether Belt - Foppapedretti Iturn duoFIX Instrucciones De Montaje

4.6.2 Removing the ISOFIX system

4.7 Adjusting and using the Top Tether belt

Grasp the Top Tether belt and, if
necessary, lengthen the strap by
pressing the appropriate locking
button, extending it to the
desired length (fig. 25).
• ENGLISH •
ASSEMBLY AND OPERATION
2 3
2 3
2 5
2 5
Tighten the Top Tether belt, pull the loose belt from the free
2 7
2 7
end until it is sufficiently tight. A special indicator on the
adjuster will turn green, to indicate that the belt has been
tightened correctly (fig. 27).
Push the car seat against the
2 4
2 4
backrest of the passenger seat (fig.
23).
At the same time press the ISOFIX
release buttons and retract the
ISOFIX connectors (fig. 24).
Attach the upper fixing device of the "Top
Tether" to the anchoring point indicated
in the vehicle user manual (fig. 26). Check
that this icon is present inside the passenger
compartment.
45
2 6
2 6