Maintenance And Cleaning - Foppapedretti RE-KLINO Manual Del Usuario

INSTALLING THE FABRIC LINING
Headrest: follow the steps in the REMOVING THE FABRIC LINING section in reverse order.
Seat fabric: follow the steps in the REMOVING THE FABRIC LINING section in reverse order.
ATTENTION: DO NOT use the child car seat without the fabric correctly installed.
IMPORTANT: Ensure that the harness belt is not twisted and that it is correctly slotted into the
slots in the fabric and correctly hooked onto the frame.

MAINTENANCE AND CLEANING

St
1. When not in use, store the product in a safe place.
2. Do not place heavy objects on top of the car seat.
3. Store the car seat in a dry place.
4. Do not leave the car seat near direct sources of heat such as electric heaters.
Lining
1. The lining can be removed easily and must be hand-washed with a delicate detergent.
2. Do not iron, do not tumble dry.
3. Do not use aggressive, abrasive detergents or solvents.
4. Let the lining air dry, away from sources of heat or direct sunlight.
5. If you need to replace the lining, only use the lining supplied by the manufacturer. The
lining has a direct impact on retaining device function.
Plastic and metal parts.
1. Clean using delicate soap and lukewarm water.
2. Do not remove, dismantle or change parts of the frame.
3. Do not lubricate parts of the frame.
Inspection.
1. Check the car seat on a regular basis and ensure there is no wear due to use.
2. Check the adjustment and locking devices at regular intervals, approximately every 6
months, and ensure that the car seat is adjusted correctly for the child's age.
3. Before each use, ensure that the harness is adjusted correctly.
4. Ensure that the belts are not twisted.
5. Ensure that the buckle is fastened correctly.
6. Ensure that the chest belts and chest protections are adjusted correctly.
7. Ensure, on a regular basis, that the car seat belt is not damaged. If the product is worn
or damaged, do not use it.
8. Also fasten up your child with the belt, even for short distances.
24
RE-KLINO